JP-850-110 Series Plastic mpempe akwụkwọ Extruder

Nkọwa dị mkpirikpi:

JP usoro plastic mpempe akwụkwọ extruders bụ igwe anyị ụlọ ọrụ mepụtara na oge a technology.The igwe na-agụnye extruder, atọ rollers, winder na electric akara kabinet. The kposara na hopperare mere nke alloy ígwè na nitrogen ọgwụgwọ, na-ekwe nkwa na ike na ike siri ike maka ezi nhazi.The T-anwụ anwụ na haịdrọlik nnyefe nyo na-eji ”hanger” imewe iji hụ na Ibé akwụkwọ 'eji ire ụtọ. The threerollers na kalenda ịgbanwe linear ọsọ, Ezi plasticization na-ekwusi evenness nke plastic sheets.Ọbụna eruba na-ekwusi ire ụtọ na ezi imecha nke plastic Ibé akwụkwọ. Ọ dabara maka PP, PS, PE, HlPS mpempe akwụkwọ maka imepụta iko mmanya dị elu, iko jelii, igbe nri na arịa rọba ndị ọzọ site na usoro thermoforming na usoro ịhịa aka n'ahụ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ọrụ na atụmatụ

Ọ dabara maka PP, PS, PE, HIPS mpempe akwụkwọ maka imepụta iko mmanya dị elu, iko jelii, igbe nri na arịa rọba ndị ọzọ site n'ịkwalite ụzọ ụzọ na oghere ụzọ ụzọ.

NDỤMỌDỤ NKE EKPERE

1) Igwe na-eme mpempe akwụkwọ plastik nwere ikike dị elu.
2) Nchekwa ike: Ihe dị ka 20% nchekwa ike karịa igwe nkịtị.
3) Anọ onwe haziri isi isi technology nke mpempe akwụkwọ extruder: extrusion usoro, anwụ, ala, rewinder na-niile na-amụ na e site onwe anyị. Maka ụfọdụ akụkụ ọkụ eletrik, anyị na-anakwere nchekwa abụọ.
4) The igwe imewe bụ ihe humanized, na ọbụna maka a ọhụrụ, ọ bụ ihe mfe iji rụọ ọrụ.
5) Mmetụta plasticizing nke mpempe akwụkwọ dị ezigbo mma. Mgbe mpempe akwụkwọ ahụ kpụrụ ma na-eje ije n'ahịrị gbagọrọ agbagọ, ọ nwere ike ijide n'aka na nkwụsi ike nke ngwaahịa mpempe akwụkwọ.
6) Igwe ọkụ na-ekpo ọkụ na-achịkwa usoro ikpo ọkụ nke china dị elu, igwe anaghị agba nchara, ụdị nchekwa dị n'ime otu ọkpọ ọkụ ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ, bụ kpọmkwem na ịchịkwa okpomọkụ, ngwa ngwa na kpo oku, dị mma na-edebe okpomọkụ, ogologo ndụ ma chekwaa oge na ike.
7) Anyị nwere otu ọrụ na-arụ ọrụ nyocha na mmepe igwe. Ka ọ dịgodị, anyị aftersales otu nwere ọgaranya ahụmahụ. Ọtụtụ n'ime ndị ọrụ nwere ihe karịrị afọ 10 ahụmahụ na mpaghara a.

PARAMETERS

Nlereanya ngwaahịa

JP-850-110- Mpempe akwụkwọ-Extruding-Machiner2

JP-850-110- Mpempe akwụkwọ-Extruding-Machiner3

JP-850-110- Mpempe akwụkwọ-Ntugharị-Machiner1

JP-850-110- Mpempe akwụkwọ-Extruding-Machiner4

Usoro mmepụta

Ụdị imekọ ihe ọnụ

FAQ

Q1: Ị bụ ụlọ ọrụ mmepụta ihe ma ọ bụ ụlọ ọrụ ịzụ ahịa?
A1: Anyị bụ ụlọ ọrụ mmepụta ihe, anyị na-ebupụ igwe anyị karịa mba 20 kemgbe 2001.

Q2: Kedu ụdị ihe igwe a nwere ike ịmepụta?
A2: Igwe nwere ike ịmepụta PP, PS, PE, HIPS mpempe akwụkwọ dị iche iche.

Q3: Ị na-anabata OEM imewe?
A3: Ee, anyị nwere ike ahaziri dị ka dị iche iche ahịa arịrịọ.

Q4: Ogologo oge ole bụ oge ikike?
A4: Igwe ahụ nwere oge nkwa otu afọ na akụkụ eletrik maka ọnwa 6.

Q5: Otu esi etinye igwe?
A5: Anyị ga-eziga onye ọrụ na ụlọ ọrụ mmepụta ihe maka otu izu n'efu igwe, na ịzụ ndị ọrụ gị ka ha jiri ya. Ị na-akwụ ụgwọ niile metụtara ya, gụnyere ụgwọ visa, tiketi ụzọ abụọ, ụlọ oriri na ọṅụṅụ, nri wdg.

Q6: Ọ bụrụ na anyị dị ọhụrụ na mpaghara a na-echegbu onwe anyị enweghị ike ịhụ injinia ọrụ na ahịa mpaghara?
A6: Anyị nwere ike inyere aka ịchọta onye injinia ọrụ site na ahịa ụlọ anyị. Ị nwere ike were ya n'ọrụ obere oge ruo mgbe ị nwere onye nwere ike ịrụ ọrụ nke ọma. Ma naanị gị na onye injinia na-emekọrịta ihe ozugbo.

Q7: Enwere ọrụ mgbakwunye uru ọzọ?
A7: Anyị nwere ike na-enye gị ụfọdụ ọkachamara aro banyere mmepụta ahụmahụ, ọmụmaatụ: anyị nwere ike na-enye ụfọdụ usoro n'elu ụfọdụ expecial ngwaahịa dị ka elu doro anya PP cup wdg.

Nke gara aga: JP-900-120 Series Plastic mpempe akwụkwọ Extruder

Osote: JP-900-135 Series Plastic mpempe akwụkwọ Extruder

Dee ozi gị ebe a ziga anyị ya