JP-900-135 Series Plastic mpempe akwụkwọ Extruder

Nkọwa dị mkpirikpi:

JP usoro plastic mpempe akwụkwọ extruders bụ igwe anyị ụlọ ọrụ mepụtara na oge a technology.They na-agụnye gia reducers, kposara na gia mgbapụta quantitative nnyefe. Ha na-onwem na Famous ika mgbali sensọ, mgbali na extruder rev mechiri emechi-loop control.The rollers eji disassembled sọrọ eru mmiri Ọdịdị, mfe ọcha na elu akara nkenke. Onye ọ bụladynamical na-anakwere njikwa onwe yana njikọ kpọmkwem iji bulie arụmọrụ. Igwe ndị ahụ na-ejikwa PLC njikwa, gụnyere bọtịnụ nkwụsị mberede, ntọala paramita n'ezie, ọrụ data, sistemụ mkpu na ọrụ akpaka ndị ọzọ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ọrụ na atụmatụ

Ihe mejupụtara mpempe akwụkwọ ahụ bụ extrusion, kalenda, traction na rewinder. Akụkụ ndị bụ isi bụ abrasion eguzogide, na-eguzogide corrosion, elu-okpomọkụ na-eguzogide site elu àgwà pụrụ iche-emeso. Ike na-eguzogide dị ala na ọwa isi na-apụ apụ na-eme ka mpempe akwụkwọ dị nha, tank nke dị n'ime ya na rollers atọ na-eme ka ọ dị mma ma ọ dị mfe ịgbanwe ma wụnye onye na-agbanwe net na igwe nrụgide hydraulic, ọ dịghị mkpa ịkwụsị igwe. Igwe ahụ na-ejikwa njikwa PLC, gụnyere bọtịnụ nkwụsị mberede, ntọala paramita n'ezie, ntinye data, sistemụ alram na ọrụ akpaka ndị ọzọ. Ọ nwere ike ịmepụta PP, PS, PE, HIPS granule na PP, PS, PE, HIPS mpempe akwụkwọ nwere otu agba, nke a na-eji maka imepụta ngwaahịa plastik site na igwe thermoforming plastik, dị ka iko, efere, mkpuchi, tray, efere, nri nri wdg.

NDỤMỌDỤ NKE EKPERE

1) Igwe na-eme mpempe akwụkwọ plastik nwere ikike dị elu.
2) Nchekwa ike: Ihe dị ka 20% nchekwa ike karịa igwe nkịtị.
3) Anọ onwe haziri isi isi technology nke mpempe akwụkwọ extruder: extrusion usoro, anwụ, ala, rewinder na-niile na-amụ na e site onwe anyị. Maka ụfọdụ akụkụ ọkụ eletrik, anyị na-anakwere nchekwa abụọ.
4) The igwe imewe bụ ihe humanized, na ọbụna maka a ọhụrụ, ọ bụ ihe mfe iji rụọ ọrụ.
5) Mmetụta plasticizing nke mpempe akwụkwọ dị ezigbo mma. Mgbe mpempe akwụkwọ ahụ kpụrụ ma na-eje ije n'ahịrị gbagọrọ agbagọ, ọ nwere ike ijide n'aka na nkwụsi ike nke ngwaahịa mpempe akwụkwọ.
6) Igwe ọkụ na-ekpo ọkụ na-achịkwa usoro ikpo ọkụ nke china dị elu, igwe anaghị agba nchara, ụdị nchekwa dị n'ime otu ọkpọ ọkụ ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ, bụ kpọmkwem na ịchịkwa okpomọkụ, ngwa ngwa na kpo oku, dị mma na-edebe okpomọkụ, ogologo ndụ ma chekwaa oge na ike.
7) Anyị nwere otu ọrụ na-arụ ọrụ nyocha na mmepe igwe. Ka ọ dịgodị, anyị aftersales otu nwere ọgaranya ahụmahụ. Ọtụtụ n'ime ndị ọrụ nwere ihe karịrị afọ 10 ahụmahụ na mpaghara a.

PARAMETERS

Nlereanya ngwaahịa

JP-850-110- Mpempe akwụkwọ-Extruding-Machiner4

Usoro mmepụta

Ụdị imekọ ihe ọnụ

FAQ

Q1: Ị bụ ụlọ ọrụ mmepụta ihe ma ọ bụ ụlọ ọrụ ịzụ ahịa?
A1: Anyị bụ ụlọ ọrụ mmepụta ihe, anyị na-ebupụ igwe anyị karịa mba 20 kemgbe 2001.

Q2: Kedu ụdị ihe igwe a nwere ike ịmepụta?
A2: Igwe nwere ike ịmepụta PP, PS, PE, HIPS mpempe akwụkwọ dị iche iche.

Q3: Ị na-anabata OEM imewe?
A3: Ee, anyị nwere ike ahaziri dị ka dị iche iche ahịa arịrịọ.

Q4: Ogologo oge ole bụ oge ikike?
A4: Igwe ahụ nwere oge nkwa otu afọ na akụkụ eletrik maka ọnwa 6.

Q5: Otu esi etinye igwe?
A5: Anyị ga-eziga onye ọrụ na ụlọ ọrụ mmepụta ihe maka otu izu n'efu igwe, na ịzụ ndị ọrụ gị ka ha jiri ya. Ị na-akwụ ụgwọ niile metụtara ya, gụnyere ụgwọ visa, tiketi ụzọ abụọ, ụlọ oriri na ọṅụṅụ, nri wdg.

Q6: Ọ bụrụ na anyị dị ọhụrụ na mpaghara a na-echegbu onwe anyị enweghị ike ịhụ injinia ọrụ na ahịa mpaghara?
A6: Anyị nwere ike inyere aka ịchọta onye injinia ọrụ site na ahịa ụlọ anyị. Ị nwere ike were ya n'ọrụ obere oge ruo mgbe ị nwere onye nwere ike ịrụ ọrụ nke ọma. Ma naanị gị na onye injinia na-emekọrịta ihe ozugbo.

Q7: Enwere ọrụ mgbakwunye uru ọzọ?
A7: Anyị nwere ike na-enye gị ụfọdụ ọkachamara aro banyere mmepụta ahụmahụ, ọmụmaatụ: anyị nwere ike na-enye ụfọdụ usoro n'elu ụfọdụ expecial ngwaahịa dị ka elu doro anya PP cup wdg.

Nke gara aga: JP-850-110 Mpempe akwụkwọ na-ebupụ igwe

Osote: Robot nwere ihe nfegharị maka agụta na ikpokọta akpaaka

Dee ozi gị ebe a ziga anyị ya